- Serving Tampa Bay & Central Florida
- Commercial & Industrial Concrete Specialists
Core Drilling in Tampa, FL
Scanned, precise core holes through slabs, walls and decks for plumbing, electrical, HVAC and fire protection penetrations.
Licensed & InsuredCommercial liability coverage
OSHA-Trained CrewsSafety-first on every site
GPR Scanning SpecialistsScan before every cut
Silica-Controlled MethodsWet cutting & vacuum control
Written Scopes & QuotesNo surprises on your invoice
Clean penetrations, exactly where your drawings need them
Every trade on a commercial job needs holes through concrete, and every one of those holes has to land in the right place without hitting what is already in the slab. Premium Concrete Technologies provides core drilling for general contractors and MEP trades across Tampa Bay and Central Florida.
We scan before we core, set up each hole to your layout and control water and slurry as we drill, so your trades get round, clean penetrations and a workable area.
- Plumbing risers, drains and sleeves
- Electrical conduit and cable pass-throughs
- HVAC and exhaust penetrations
- Fire sprinkler lines
- Anchor and dowel holes
Tendons, rebar and conduit located before we drill.
Water captured and slurry removed as we go.
Hole diameters matched to your pipe, sleeve or duct.
Work sequenced to your layout and trade schedule.
Coring for every trade
Floor & Slab Coring
Vertical cores through slabs-on-grade, elevated floors and parking decks.
Wall Coring
Horizontal cores through concrete and masonry walls for pipe, conduit and duct.
Overhead Coring
Cores drilled from below when access from above is not possible, with water captured as we drill.
Angle Coring
Cores drilled at an angle for drainage, special penetrations and anchoring.
Large-Diameter Coring
Larger cores for risers, ducts and chases, sized to your penetration.
Anchors, Dowels & Sampling
Accurate holes for anchors, dowels and rebar extensions, plus cores pulled for testing.
Penetrations for every trade
Our coring work is built around the trades that need holes through concrete: plumbers, electricians, mechanical contractors and fire protection.
How a coring job runs
Review & Quote
Send hole sizes, counts, locations and slab or wall thickness. We send back a written quote.
Scan & Mark
We scan each location and mark embedded reinforcement, cables and conduit.
Core
We set up, anchor or brace the rig as needed and drill each hole to size.
Clean Up
Cores and slurry are removed as scoped and every hole is checked with your team.
Recent work, real results
Core drilling questions
Have a question about your project? Call us or send your scope and drawings and we will walk through it with you.
Yes. We scan each core location first so rebar, post-tension cables and conduit can be located and avoided. Coring through a post-tension cable can cause serious damage and injury, so scanning comes first.
We core a wide range of diameters for plumbing, electrical, HVAC and fire protection penetrations. Send us the sizes and counts you need and we will confirm the approach in your quote.
Yes. We core floors, walls and overhead when the job calls for it. Tell us the location and access conditions so we can plan the setup and water control.
Only after the slab has been scanned and the tendons located and marked. Core locations should be confirmed with your team before drilling.
We use water to cool the bit and control dust, and we contain and remove the slurry as we work, with extra protection in occupied or finished spaces.
Yes. Angle coring is used for drainage and special penetrations. Share the location, angle and diameter and we will confirm the setup.
Let’s solve your next cut.
Send the details and our team will review your scope and follow up with a clear, written quote.
Tell us about the jobUse the form or call. Include drawings, photos, locations and thickness if you have them.
We review the scopeOur team confirms access, conditions and schedule and asks any follow-up questions.
You get a written quoteA clear scope and price you can take to your project team.
We schedule the crewWe scan, cut and core on your timeline and close out with your superintendent.
Free, no-obligation quotes for commercial projects.